Ambassador Profile | Nick Tobin, Bladesmith

Our good friend Nick Tobin recently hung up his CEC CORP banner. Nick is a self taught bladesmith who creates custom knives in New Brunswick, Canada. Nick has been a client of ours for some time and became a CEC CORP ambassador after he showing interest in our products. Nick trusts our C-Tough on his knife handles for a tough and flexible bond which will last a lifetime. His work can be found on his Instagram page (@pickle_kutterz). View this post on Instagram A post shared by CEC CORP (@cec_corp)

Read more

CA Glue with no Accelerator VS with Accelerator

CA glue accelerators, or glue activators, are often paired with higher viscosity glues because thicker glues take longer to dry. C-Set Accelerator works best with our C-Bond Thick CA glue. Compatible with all cyanoacrylate glues, it can be used before or after glue application. See the difference in drying times between CA glue with no accelerator and CA glue with accelerator.

Read more

How to use Epoxy to Wrap Knife Handle with Hemp Cord

Knife-making is one of many applications for our C-Tough epoxy adhesive. Cadsandblades recently used our C-Tough epoxy adhesive to finish off a knife handle with a hemp cord wrap. The results were great! Here are his instructions on how he did it.
Read more

Wood and Wood Black Cyanoacrylate at work

In this video @amirs_workshop is showcasing 2 of our Cyanoacrylate glues, Instant Glue Wood and Instant Glue Wood Black. They get the job done well. Your browser does not support our video.

Read more

A knife maker tests our C-TOUGH

One of our knife-making customers tested C-TOUGH and was kind enough to record a video of the strength testing. Check out his instagram page on  IG page @jball_knives   Your browser does not support our video.

Read more

Cyanoacrylate Wood Black in Woodworking

One of our loyal customers tested our Instant Wood Glue (Black) in his woodworking project. He was happy with the result. Here is a video he sent us.   Your browser does not support our video.

Read more