Description

C-Pure PB 60 is a two-component polyurethane structural adhesive engineered for bonding steel and aluminum panels in automotive, industrial, and construction applications. It delivers Shore D 80 hardness, 40,000 mPa·s mixed viscosity, 15% elongation, and 1.10 relative density for high mechanical strength and impact resistance. Its thixotropic, non-sag formulation enables controlled application on vertical and overhead surfaces, with a 60-minute working time and 24-hour paint-ready cure.

Ideal Applications:
  • Automotive panel bonding including quarter panels, roofs, and door skins
  • Metal-to-metal structural bonding
  • Utility and commercial vehicle body assembly
  • Industrial fabrication and assembly
  • Construction panel installation

 

Automotive Applications: Panel Bonding

Panel Bonding 1 Panel Bonding 2 Panel Bonding 3 Panel Bonding 4 Panel Bonding 5


Instructions

  1. Prepare and clean all bonding surfaces to remove contaminants.
  2. Mix or dispense the two-component adhesive using a compatible system.
  3. Apply evenly to the substrate and position components within 60 minutes.
  4. Allow curing for 24 hours before painting or full load application.

C-Pure PB 60 | Two-Part Polyurethane Adhesive for Metal Panel Bonding


Size: 200 ml
Price:
Sale price$50.00

Description

C-Pure PB 60 is a two-component polyurethane structural adhesive engineered for bonding steel and aluminum panels in automotive, industrial, and construction applications. It delivers Shore D 80 hardness, 40,000 mPa·s mixed viscosity, 15% elongation, and 1.10 relative density for high mechanical strength and impact resistance. Its thixotropic, non-sag formulation enables controlled application on vertical and overhead surfaces, with a 60-minute working time and 24-hour paint-ready cure.

Ideal Applications:
  • Automotive panel bonding including quarter panels, roofs, and door skins
  • Metal-to-metal structural bonding
  • Utility and commercial vehicle body assembly
  • Industrial fabrication and assembly
  • Construction panel installation

 

Automotive Applications: Panel Bonding

Panel Bonding 1 Panel Bonding 2 Panel Bonding 3 Panel Bonding 4 Panel Bonding 5


Instructions

  1. Prepare and clean all bonding surfaces to remove contaminants.
  2. Mix or dispense the two-component adhesive using a compatible system.
  3. Apply evenly to the substrate and position components within 60 minutes.
  4. Allow curing for 24 hours before painting or full load application.

Recently viewed