When it comes to instant glue, also known as super glue, choosing the right viscosity (thickness) is important for achieving a successful bond for your project. Viscosity refers to the thickness or consistency of the glue, and it can affect how well the glue adheres to the surfaces you're bonding together. Here's what you need to know to choose the right viscosity for your instant glue. Low Viscosity Low viscosity instant glue is thin and runny, which makes it ideal for bonding materials with tight-fitting joints. This type of glue is excellent for bonding surfaces that need to be tightly...
We're very excited to announce that we will take part in BUILDEX Vancouver on Feb 15 and 16, 2023! This is an excellent opportunity for us to build our brand and make new relationships face-to-face. For more information and to register visit:
Enter code: CEC23 for a free tradeshow pass!
New addition to our general-purpose CA glue lineup: C-Bond Medium! This medium viscosity cyanoacrylate glue can be used to bond wood, metal, plastic, rubber and more. C-Bond Medium has a viscosity level of 250–350 cps—thicker than C-Bond Thin which is 30–50 cps, and thinner than C-Bond Thick which is 1200–1400 cps. Centipoise, or cps, is a unit of measure of viscosity/thickness. For reference, the viscosity of water is 1 cps. This means our C-Bond Extra Thin, with a viscosity of 1-3 cps, has almost the same consistency of water. Along with the rest of the C-Bond lineup, C-Bond Medium is...
Introducing our new two-part epoxy casting system, C-CAST! With a non-yellowing and bubble-free formula, C-Cast is designed to offer unrivalled clarity and UV resistance. C-Cast allows for casting layers of up to 3 inches for wooden substrates and up to 3.5 inches for other materials such as silicon or plastic molds, so you can have deeper pours. This epoxy casting system is also formulated with minimal shrinkage and thorough wetting power for maximum coverage and to fill cracks and voids. Our new C-Cast has a 2:1 mixing ratio and is available in 1.5 Gallon kits: 1 Gal Resin and 0.5...
Our good friend Nick Tobin recently hung up his CECCORP banner. Nick is a self taught blade smith who creates custom knives in New Brunswick, Canada. Nick has been a client of ours for some time and became a CECCORP ambassador after he showing interest in our products. Nick trusts our C-Tough on his knife handles for a tough and flexible bond which will last a lifetime. His work can be found on his Instagram page (@pickle_kutterz).
View this post on Instagram
A post shared by CEC CORP (@cec_corp)
CA glue accelerators, or glue activators, are often paired with higher viscosity glues because thicker glues take longer to dry.
C-Set Accelerator works best with our C-Bond Thick CA glue. Compatible with all cyanoacrylate glues, it can be used before or after glue application.
See the difference in drying times between CA glue with no accelerator and CA glue with accelerator.