Description

C-Pure Low/Medium Build Seam Sealer is a two-part polyurethane seam sealer engineered for sealing and bonding automotive and industrial seams, featuring a 15-minute working time, 30-minute paint readiness, and full cure within 12 hours. Its non-sag thixotropic formula delivers 40,000 mPa·s viscosity, Shore D 40 hardness, 90% elongation, and 1.08 relative density for strong, flexible, and crack-resistant performance on vertical and overhead applications.

Ideal Applications:
  • Automotive panel seams including doors, floors, and truck beds
  • Structural bonding in industrial assemblies
  • Sealing joints in construction materials
  • OEM seam replication with spray-effect finishes
  • Vertical and overhead seam sealing

 

Automotive Applications: Seam Sealers

OEM Medium Build Effect OEM Low Build Effect Medium Build Spray Effect


TDS 

 

Instructions

  1. Clean and degrease the surface thoroughly.
  2. Abrade the bonding area to improve adhesion.
  3. Mix and apply using a manual or pneumatic dispenser.
  4. Shape the seam as required before curing.
  5. Allow 12 hours for full cure before heavy use.

C-Pure Low/Medium Build Seam Sealer | Two-Part Polyurethane Adhesive for Sealing and Bonding Seams


Color: Gray
Size: 200 ml
Prix:
Prix réduit$50.00

Description

C-Pure Low/Medium Build Seam Sealer is a two-part polyurethane seam sealer engineered for sealing and bonding automotive and industrial seams, featuring a 15-minute working time, 30-minute paint readiness, and full cure within 12 hours. Its non-sag thixotropic formula delivers 40,000 mPa·s viscosity, Shore D 40 hardness, 90% elongation, and 1.08 relative density for strong, flexible, and crack-resistant performance on vertical and overhead applications.

Ideal Applications:
  • Automotive panel seams including doors, floors, and truck beds
  • Structural bonding in industrial assemblies
  • Sealing joints in construction materials
  • OEM seam replication with spray-effect finishes
  • Vertical and overhead seam sealing

 

Automotive Applications: Seam Sealers

OEM Medium Build Effect OEM Low Build Effect Medium Build Spray Effect


TDS 

 

Instructions

  1. Clean and degrease the surface thoroughly.
  2. Abrade the bonding area to improve adhesion.
  3. Mix and apply using a manual or pneumatic dispenser.
  4. Shape the seam as required before curing.
  5. Allow 12 hours for full cure before heavy use.

You may also need

Dispenser Gun
Dispenser Gun $113.00

Recently viewed