Description

C-Pure High Build Seam Sealer is a two-component polyurethane seam sealer engineered for high-build seam replication and structural bonding on vertical and horizontal joints. It features a thixotropic, non-sag formula for controlled application and OEM-style finishing, with a 15-minute working time, 30-minute paint readiness, 1-hour bonding time, and full cure within 12 hours. The material delivers 50,000 mPa·s mixed viscosity, 1.08 relative density, Shore D 40 hardness, and 90% elongation for flexible, crack-resistant performance.

Ideal Applications:
  • Automotive body panel seams
  • Wheel wells and underbody joints
  • Structural bonding in industrial assemblies
  • Vertical and horizontal seam sealing
  • Construction joint sealing

 

 

Automotive Applications: Seam Sealers

High Build Seam Sealer Application


TDS 

 

Instructions

  1. Clean and prepare surfaces by degreasing and abrading.
  2. Mix and dispense using a manual or pneumatic applicator.
  3. Apply bead to the seam and tool or texture as required.
  4. Allow 30 minutes before painting.
  5. Let cure fully for 12 hours before full load.

C-Pure High Build Seam Sealer | Two-Part Polyurethane Adhesive for Sealing and Bonding Seams


Color: Gray
Size: 200 ml
Prix:
Prix réduit$50.00

Description

C-Pure High Build Seam Sealer is a two-component polyurethane seam sealer engineered for high-build seam replication and structural bonding on vertical and horizontal joints. It features a thixotropic, non-sag formula for controlled application and OEM-style finishing, with a 15-minute working time, 30-minute paint readiness, 1-hour bonding time, and full cure within 12 hours. The material delivers 50,000 mPa·s mixed viscosity, 1.08 relative density, Shore D 40 hardness, and 90% elongation for flexible, crack-resistant performance.

Ideal Applications:
  • Automotive body panel seams
  • Wheel wells and underbody joints
  • Structural bonding in industrial assemblies
  • Vertical and horizontal seam sealing
  • Construction joint sealing

 

 

Automotive Applications: Seam Sealers

High Build Seam Sealer Application


TDS 

 

Instructions

  1. Clean and prepare surfaces by degreasing and abrading.
  2. Mix and dispense using a manual or pneumatic applicator.
  3. Apply bead to the seam and tool or texture as required.
  4. Allow 30 minutes before painting.
  5. Let cure fully for 12 hours before full load.

You may also need

Dispenser Gun
Dispenser Gun $113.00

Recently viewed