C-Melt C 99

Multi-purpose packaging, hot melt adhesive–with synthetic resin base–that is used in a wide range of packaging applications, such as carton sealing, tray erection, ream wrapping and assembly of difficult substrates.

See Technical Data Sheet below, or view the PDF here.

TECHNICAL DATA
Viscosity at 160°C (Brookfield, Thermosel System) (ASTM D.3236) 1550 ± 310 mPa.s
Softening Point (R&B) (ASTM E.28) 111 ± 5 °C
Colour White
Density (MC206)

Approx. 0.91

PROPERTIES
Open time (MC 129 at 160°C) Typical value 3 – 4 s
Setting time (MC 129 at 160°C) Typical value 0.5 – 1 s
Heat resistance SAFT (MC218 2.27 Psi) Typical value 65 °C

Good hot tack

This product compared to EVA adhesive has an improved thermal stability, stays constant in its viscosity, therefore no changes in the adhesion and in the processing quality, even by longer rests in the adhesive melting machines

Low consumption adhesive, with extremely low density

Odour, smoke and organic solvents free adhesive

All components comply with paragraph 21CFR175.105 of FDA Legislation

APPLICATION
For use in nozzle, roller or other applicator system
Recommended working temperature 150 – 180 °C

Temperatures above 190 °C should be avoided

The equipment needs to be freed from EVA hot melt and cleaned since this product is not compatible with EVA based hot melts

During extended machine stops it is recommended to switch off the heating

CLEANING
While hot by scrapping with a spatula and remove any rests with Hot-Melt Cleaners CC19
FORM OF SUPPLY Prills
STORAGE Cool and dry; Storage life: at least 2 years according to our experience