| TECHNICAL DATA | ||
|---|---|---|
| Viscosity at 160°C (Brookfield, Thermosel System) (ASTM D.3236) | 1300 ± 260 mPa.s | |
| Softening Point (R&B) (ASTM E.28) | 105 ± 5 °C | |
| Colour | White | |
| Density (MC206) |
Approx. 0.92 |
|
| PROPERTIES | ||
| Open time (MC 129 at 160°C) Typical value | 9 – 10 s | |
| Setting time (MC 129 at 160°C) Typical value | 4 – 5 s | |
| Heat resistance SAFT (MC218 1kgf/25mm) Typical value | 65 °C | |
|
Good hot tack Good adhesion to difficult substrates Depending on substrates, this product can allow bonds with heat resistance up to +65 °C and cold resistance down to -40 °C This product compared to EVA adhesive has an improved thermal stability, stays constant in its viscosity, therefore no changes in the adhesion and in the processing quality, even by longer rests in the adhesive melting machines Low consumption adhesive, with extremely low density Odour and smoke free Adhesive free from organic solvents All components comply with paragraph 21CFR175.105 of FDA Legislation |
||
| APPLICATION | ||
| For use in nozzle, roller or other applicator system | ||
| Recommended working temperature | 150 – 180 °C | |
|
Temperatures above 190 °C should be avoided The equipment needs to be freed from EVA hot melt and cleaned since this product is not compatible with EVA based hot melts During extended machine stops it is recommended to switch off the heating |
||
| CLEANING | ||
| While hot by scrapping with a spatula and remove any rests with Hot-Melt Cleaners CC02 | ||
| FORM OF SUPPLY | Small pillows, approx. 20g | |
| STORAGE | Cool and dry; Storage life: at least 2 years according to our experience | |
